Working principle：
TGW The no heat regenerative dryer is a kind of equipment for
drying compressed air according to the principle of pressure swing adsorption.
It absorbs water in compressed air under the condition of pressure, so that
compressed air can be dried. When decompression, a part of dry compressed air
is used to purge adsorbent, so that the adsorbent can be regenerated. The two
towers alternate and recycle. Dry compressed air is obtained. According to the
different dew point of compressed air at atmospheric pressure, different
adsorbents are selected, commonly used adsorbents are activated alumina,
molecular sieve, etc.
Features：
The special gas distributor ensures the
uniform distribution of air flow, makes the compressed air and adsorbent fully
in contact, and prevents the "dead angle" and "tunnel
effect" of adsorption.
Automatic pressure settings，Equalizing process，To reduce the flow of adsorbent impact。
Flanged filling port and discharge port，Easy to replace desiccant。
Scientific speed design, high quality adsorbent selection
ensure the stability of finished gas dew point.
Adopts Germany Siemens PLC controller，LCD， Humanization design，light touching the key operate，The working regeneration time can be adjusted according to the
working conditions.
Drying and regeneration status display
Control the air source from the adsorption tower outlet
dry air, to avoid oil and water pollution control valve and gas path, prevent
valve rust and gas path blockage.
High Quality control components，Ensure long term reliable operation of
equipmen
Working pressure：0.6～1.0MPa（according
to user's request can provide 1.0～3.0MPa）
Inlet temperature：≤ 45℃
Atmospheric dew point ：≤一40℃~(alumina)，≤一60℃~(molecular sieve)
Regenerated gas consumption：≤12％
Working power ：220V/50Hz
